* Products * Home F A Q`s Free Plans Links Contact Order Now

Advantages of anchoring the foot of your Playground Slide:

Dare 2 Play Playground Slide Installation Tips

How to anchor the foot of your Playground Slide:

One quick and easy way to secure playground slides is to hammer timber stakes into the ground and screw the slide to them.

Another quick and easy way to anchor slides:  

To install your Playground Slide onto your play structure simply place it onto its platform and screw it down.  

It is NOT SAFE to use any playground slide that has not  been secured at the top!

A Playground Slides platform height is the height difference between the top of the slide and the ground the foot of the slide sits on.

The play structure in the Photo above has a platform that is 1450mm high. *RED Arrow

The *green arrow shows a slope of 200mm

The Wave Slide posing in the photo above is installed at the height of 1650mm!

Playground Slides Optimum Platform Height Fun Playground Wave Slide Kids Playground Slide Kids Playground Slide Playground Slide Wonder Wave Slide Photo Plastic Wave Silde

To lessen the angle of The Wonder Wave Slide - timber is easily screwed to the foot of the slide.

The exit seat height of the slide with out being raised is 210mm, Photos show the wonder wave slide raised by 100mm.

Wave Silde with Foot Raised

Playground Slides Optimum Platform Height

Screw Wonder Wave Slide to play structure

After screwing Wonder Wave Slide to play structure platform, drill a small hole to allow water to drain away.