Dare 2 Play Playground Equipment Supplies

Check Out / View Shipping Shop Terms
Swing Seats Swing Hangers Chain and Rope Sets  Trapeze Swings Hardware DIY Playground Parts Playground Climbing Outdoor Toys Playground Slides
Contact Home Plans & Guides Back <<< FAQ`S
2 Bolt Swing Hangers $42.00
pair

2 Bolt Timber Beam Swing Hangers

Heavy duty, galvanised cast steel construction with quality oil impregnated bronze bushings ,Pre greased to assure the best squeak free performance possible.

Features a 12 mm axle bolt that threads into the support bracket and is secured with a nyloc nut.

 Easy Installation: Bolt to timber swing beams with four 10 or 12 mm coach bolts or use four 12 mm coach screws.

Heavy Duty Swing Hanger Residential Playground Tyre Swivel
Residential Playground Tyre Swivel $45.00 Each
Qty:

Single point Playground Tyre Swivel

Single point tyre swivel, ideal for residential playgrounds. Also has a grease nipple to keep the swivel well lubricated and noise free!

Steel finished with green powder coating.

Baseplate size 65mm x 124mm

Triple Point Playground Tyre Swivel
Triple Point Playground Tyre Swivel $55.00 Each
Qty:

Triple Point Playground Tyre Swivel

Triple point tyre swivel, for installation onto wooden swing beams.

Swings and spins 360 degrees without tangling the chain! Features a grease a nipple to lubricate the ball, steel finished with green powder coating.

Baseplate size 80mm x 148mm

Wood Thread Eye Screw

Ideal to use when installing Climbing Ropes and Ladders, Scramble Nets, Gym/Trapeze Rings etc.

Installation: Drill pilot holes with a 6 to 8 mm drill bit. (NB: do not fasten into the end grain of timber.)Shaft Diameter:12 m

Eye 25mm inside Diameter, length: 125mm

Eye Hook
Wood Thread Eye Screw $3.00 Each
Qty:
1 Bolt Swing Hangers $35.00
pair

1 Bolt Timber Beam Swing Hangers

Strong and durable design, these heavy duty Swing Hangers with ‘teeth’ on top that grip into timber swing beams and prevent them from turning, the axle bolt is12 mm and secured with a Nyloc nut.

The Pendulum has nylon bushings or Maintenance free, oil impregnated bronze bushings.

Pre greased to guarantee the best performance possible..

Installation: Bolt to timber swing beams with two 10 mm or 12 mm coach bolt or coach screws. These hangers can also be welded onto steel swing frames.

Swing hanger specification
Carabiner Swing Hangers $15.00
pair

Carabiner Swing Hangers

This Swing Hanger features nylon bushing with carabiner pendulum for attaching Swing Seat chains or other swing accessories to timber swing sets in a snap. Ideally suited for residential playgrounds with lower swing beams for easy reach!

Shaft Diameter: 12 mm Shaft length 150 mm

Karabiner Swing Hangers #top

Home-Play Bolt Through Swing Hangers

These Budget swing hangers are fantastic value for money! Suitable for lower beam heights, to hang Infant or Toddler Swing Seats only. Great for that baby swing on Grandma’s pergola or at the bach.

Installation: The Shaft of the hanger must be completely in the wood, ie. the only visible part of the hanger should be the triangle and the Pendulum with the nylon bearing. Cut off excess thread flush with the nuts to reduce the risk of children becoming entangled if they climb on the swing beam, countersink the nuts if feasible. M10 shaft diameter

Shaft lengths available: 50mm, 100mm and 150mm Grade: Residential

Home Play Bolt Through Swing Hangers
Home-Play Swing Hangers $10
pair
Copyright

Swing Hangers

For Commercial and Residential Playground Equipment

Made in New Zealand and imported Swing Hangers for attaching to any suitably strong support: for steel swing sets, timber swing sets, tree branches, under decks, onto pergolas or any play structure!

Don’t just hang your swing on a hook!

Swing Hanger Bushings provide a smooth and efficient sliding motion between the moving parts.

Build the best DIY Swing Set possible, or improve the performance and feel of your old swing.

All Swing Hangers are sold in pairs.

1 Bolt Swing Hangers

All of our prices are current and include GST.

Click On Photos To Enlarge

4 Bolt Swing Hangers $46.00
pair
4 Bolt Timber Beam Swing Hangers

4 Bolt Timber Beam Swing Hangers

Top quality, heavy duty swing hangers with large mounting plates and four bolt holes for superior holding power. Galvanised cast steel construction with quality oil impregnated bronze bushings, pre-greased to assure the best squeak free performance possible.

Features a 12 mm axle bolt that threads into the support bracket and is secured with a nyloc nut.

Easy installation: bolt to timber swing beams with eight 10 mm coach bolts, or use eight 10 mm coach screws.

Mounting Plate Size: 65 x 135 mm

Wood Thread Swing Hangers

Recommended for residential use only, these budget Swing Hangers have nylon bushing and a 12 mm shaft. Not recommended for high use or commercial situations.

Use to attach Swing Seats and Trapeze Bars to timber swing beams, tree branches, under decks, in the garage, carport, pergola or play structure!

Installation: Drill 5 or 6 mm pilot holes and screw in the full length of the shaft for maximum strength.

Wood Thread Swing Hangers $15.00
pair

SOLD OUT